ZyXEL Communications G-2000 Plus User Manual

ZyAIR G-2000 Plus User’s Guide

Chapter 12 Remote Management Screens

164

Figure 70   Remote Management: SNMP

The following table describes the labels in this screen.

Table 54   Remote Management: SNMP

SNMP Configuration

Get Community

Enter the Get Community, which is the password for the incoming Get and 

GetNext requests from the management station. The default is public and allows 

all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests from 

the management station. The default is public and allows all requests.

Trusted Host

If you enter a trusted host, your ZyAIR will only respond to SNMP messages 

from this address. A blank (default) field means your ZyAIR will respond to all 

SNMP messages it receives, regardless of source.

Trap

Community

Type the trap community, which is the password sent with each trap to the 

SNMP manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

SNMP

Service Port

You may change the server port number for a service if needed, however you 

must use the same port number in order to use that service for remote 

management.