ZyXEL Communications G-2000 Plus User Manual

Page of 430
ZyAIR G-2000 Plus User’s Guide
275 
Chapter 24 Internet Access
Figure 133   
                         Menu 4 - Internet Access Setup
                    ISP's Name= ChangeMe
                    Encapsulation= Ethernet
                      Service Type= Standard
                      My Login= N/A
                      My Password= N/A
                      Retype to Confirm= N/A
                      Login Server= N/A
                      Relogin Every (min)=  N/A
                    IP Address Assignment= Dynamic
                      IP Address= N/A
                      IP Subnet Mask= N/A
                      Gateway IP Address= N/A
                    Network Address Translation= SUA Only
                    Press ENTER to Confirm or ESC to Cancel:
Press ENTER to Confirm or ESC to Cancel:
Menu 4 Internet Access Setup
The following table describes the fields in this menu.
Table 92   Internet Access Setup  (Ethernet 
FIELD
DESCRIPTION
ISP’s Name
Enter the name of your Internet Service Provider, e.g., myISP. This 
information is for identification purposes only.
Encapsulation
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The 
encapsulation method influences your choices for the IP Address field.
Service Type
Press [SPACE BAR] and then [ENTER] to select StandardRR-Toshiba 
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner 
Manager authentication method), RR-Telstra or Telia Login. Choose a 
RoadRunner flavor if your ISP is Time Warner's RoadRunner; otherwise 
choose Standard.
Note: DSL users must choose the Standard option only. The My LoginMy Password and Login 
Server fields are not applicable in this case.
My Login 
Enter the login name given to you by your ISP.
My Password
Type your password again for confirmation.
Retype to Confirm
Enter your password again to make sure that you have entered is correctly.
Login Server
The ZyAIR will find the RoadRunner Server IP if this field is left blank. If it 
does not, then you must enter the authentication server IP address.
Relogin Every (min) 
This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyAIR out if the ZyAIR does not log in periodically. 
Type the number of minutes from 1 to 59 (30 recommended) for the ZyAIR to 
wait between logins.
IP Address Assignment If your ISP did not assign you a fixed IP address, press [SPACE BAR] and 
then [ENTER] to select Dynamic, otherwise select Static and enter the IP 
address and subnet mask in the following fields.
IP Address
Enter the (fixed) IP address assigned to you by your ISP (static IP address 
assignment is selected in the previous field).