ZyXEL Communications G-2000 Plus User Manual

ZyAIR G-2000 Plus User’s Guide

341 

Chapter 33 System Information and Diagnosis

You can set up different port speeds for the console port through Menu 24.2.2 – System 
Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400, 
57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select 
the desired speed in menu 24.2.2, as shown in the following figure.

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel:

After you changed the console port speed on your ZyAIR, you must also make the same 
change to the console port speed parameter of your communication software.

Your ZyAIR provides the error logs and trace records that are stored locally. 

The first place you should look for clues when something goes wrong is the error log. Follow 
the procedures to view the local error/trace log:

1 Type 24 in the main menu to display Menu 24 – System Maintenance.

2 From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware 

version. ZyNOS is a registered trademark of ZyXEL Communications 

Corporation.

Country Code

Refers to the country code of the firmware. 

LAN

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) of your ZyAIR.

IP Address

This is the IP address of the ZyAIR in dotted decimal notation.

IP Mask

This shows the subnet mask of the ZyAIR.

DHCP

This field shows the DHCP setting of the ZyAIR. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Table 116   Menu 24.2.1 System Maintenance : Information