ZyXEL Communications G-2000 Plus User Manual

ZyAIR G-2000 Plus User’s Guide

Chapter 35 System Maintenance and Information

366

              Menu 24.10 - System Maintenance - Time and Date Setting

          Time Protocol= Manual
          Time Server Address= N/A

          Current Time:                         01 : 00 : 37
          New Time (hh:mm:ss):                  01 : 00 : 34

          Current Date:                         2000 - 01 - 01
          New Date (yyyy-mm-dd):                2000 - 01 - 01

          Time Zone= GMT

          Daylight Saving= No
          Start Date (mm-dd):                          01 - 01
          End Date (mm-dd):                            01 - 01

                    Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.

The following table describes the fields in this menu.

Table 124   System Maintenance : Time and Date Setting

Time Protocol

Enter the time service protocol that your time server sends when you turn on 

the ZyAIR. Not all time servers support all protocols, so you may have to check 

with your ISP/network administrator or use trial and error to find a protocol that 

works. The main differences between them are the format. 
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of 

seconds since 1970/1/1 at 0:0:0. 
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.

Time Server Address

Enter the IP address or domain name of your time server. Check with your ISP/

network administrator if you are unsure of this information.

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format.

Current Date

This field displays an updated date only when you re-enter this menu.

New Date

Enter the new date in year, month and day format.

Time Zone

Press [SPACE BAR] and then [ENTER] to set the time difference between your 

time zone and Greenwich Mean Time (GMT).  

Daylight Saving

If you use daylight savings time, then choose Yes.

Start Date

If using daylight savings time, enter the month and day that it starts on.

End Date

If using daylight savings time, enter the month and day that it ends on

Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to 

Cancel“ to save your configuration, or press [ESC] to cancel.