ZyXEL Communications G-2000 Plus User Manual

ZyAIR G-2000 Plus User’s Guide

Chapter 3 Wizard Setup

62

Click Back to return to the previous screen or click Finish to complete and save the wizard 
setup.

First DNS Server
 
Second DNS Server 

Third DNS Server 

Select From ISP if your ISP dynamically assigns DNS server information 

(and the ZyAIR's WAN IP address). The field to the right displays the (read-

only) DNS server IP address that the ISP assigns. 
Select User-Defined if you have the IP address of a DNS server. Enter the 

DNS server's IP address in the field to the right. 
Select None if you do not want to configure DNS servers. If you do not 

configure a system DNS server, you must use IP addresses when 

configuring VPN, DDNS and the time server.

WAN MAC Address

The MAC address field allows you to configure the WAN port's MAC 

Address by either using the factory default or cloning the MAC address 

from a computer on your LAN.

Factory Default 

Select this option to use the factory assigned default MAC Address.

Spoof this Computer's 

MAC address - IP Address

Select this option and enter the IP address of the computer on the LAN 

whose MAC you are cloning. Once it is successfully configured, the 

address will be copied to the rom file (ZyNOS configuration file). It will not 

change unless you change the setting or upload a different rom file. It is 

advisable to clone the MAC address from a computer on your LAN even if 

your ISP does not presently require MAC address authentication.

Back

Click Back to return to the previous screen.

Next

Click Next to continue. 

Table 12   Wizard 5: WAN Setup