ZyXEL Communications G-2000 Plus User Manual

ZyAIR G-2000 Plus User’s Guide

67 

Chapter 4 System Screens

To change your ZyAIR’s password (recommended), click the SYSTEM link under 
ADVANCED and then the Password tab. The screen appears as shown. This screen allows 
you to change the ZyAIR’s password.

If you forget your password (or the ZyAIR IP address), you will need to reset the ZyAIR. See 
the Resetting the ZyAIR section for details

Figure 16   Password.

The following table describes the labels in this screen.

Table 15   Password

Old Password

Type in your existing system password (1234 is the default password).

New Password

Type your new system password (up to 31 characters). Note that as you type a 

password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm

Retype your new system password for confirmation.

Apply

Click Apply to save your changes back to the ZyAIR.

Reset

Click Reset to reload the previous configuration for this screen.

Use WAN IP address

Select this option to update the IP address of the host name(s) automatically 

by the DDNS server. It is recommended that you select this option.

DDNS server auto 

detect IP Address 

Select this option to update the IP address of the host name(s) automatically 

by the DDNS server. It is recommended that you select this option.

Use specified IP 

Address

Select this option to update the IP address of the host name(s) to the IP 

address specified below. Use this option if you have a static IP address.

IP Address

Enter the IP address if you select the Use specified IP Address option.

Apply

Click Apply to save your changes back to the ZyAIR.

Reset

Click Reset to begin configuring this screen afresh.

Table 14   DDNS