ZyXEL Communications wireless active fiber router User Manual
Chapter 4 Wireless LAN
FSG1100HN User’s Guide
37
4.6
Wireless Security Screen
The Wireless Security Setup window allows users to configure WEP, WPA, WPA2,
and WPA-Mixed encryption.
and WPA-Mixed encryption.
Click Wireless > Security to open the Wireless Security screen.
Wireless > Security
The following table describes the wireless security labels in this screen
Wireless > Security
LABEL
DESCRIPTION
Wireless Security Setup
Select
SSID
SSID
Select the desired Service Set Identity (SSID).
Encryption Choose from the following encryption options: WEP. WPA, WPA2,
WPA-Mixed, and Disable. The default is Disable.
Apply
Click Apply to save your changes back to the FSG1100HN.
Reset
Click Reset the settings on this screen.
4.6.1 WEP
Wired Equivalent Privacy (WEP) is an encryption security option based on IEEE
802.11 that uses the RC4 encryption algorithm. WEP encryption scrambles the
data transmitted between the wireless stations and the access points to keep
network communications private. It encrypts unicast and multicast communications
in a network. Both the wireless stations and the access points must use the same
WEP key. The FSG1100HN allows configuration of up to four 64-bit or 128-bit WEP
keys but only one key can be enabled at any one time.
802.11 that uses the RC4 encryption algorithm. WEP encryption scrambles the
data transmitted between the wireless stations and the access points to keep
network communications private. It encrypts unicast and multicast communications
in a network. Both the wireless stations and the access points must use the same
WEP key. The FSG1100HN allows configuration of up to four 64-bit or 128-bit WEP
keys but only one key can be enabled at any one time.
Click Wireless > Security > WEP to open the Wireless Security WEP screen.