ZyXEL Communications 782R User Manual

Prestige 782R G.SHDSL Router

Hardware Installation and Initial Setup

2-9

Menu 1 – General Setup contains administrative and system-related information.

To go to Menu 1 and fill in the required information, follow these steps:

Step 1.  In the Main Menu, type 1 to open Menu 1 – General Setup, shown next.

Step 2.  Fill in the required fields marked [?] and turn on the individual protocols for your applications,

as explained in the following table.

System Name Type any descriptive name, (with no spaces), up to 30 alphanumeric

characters long, including dashes “–” and underscores "_".  This field is for
descriptive purposes; however, some ISPs check this name.  If your ISP
checks this name then you should type your computer’s “Computer Name”
(Start  -> Settings -> Control Panel  Network). Click on the Identification tab
and note the entry for the Computer Name field.

P782R

Location
(optional)

Type the location (up to 31 characters) of your Prestige.

MyHouse

Contact
Person's
Name
(optional)

Type the name (up to 30 characters) of the person in charge of your Prestige.

JohnDoe

Route IP

Select Yes to enable IP routing. This is needed to access the Internet.

Route IPX

Select Yes to enable IPX routing.

Bridge

Select Yes to enable bridging (see note on Bridging).

Menu 1 - General Setup

System Name= P782
Location= MyHouse
Contact Person's Name= JohnDoe

Route IP= Yes
Route IPX= No
Bridge= No

Press ENTER to Confirm or ESC to Cancel: