ZyXEL Communications 782R User Manual

Prestige 782R G.SHDSL Router

3-8

Internet Access

Follow the instructions in the following table to configure IP Alias parameters.

IP Alias 1/2

Choose Yes to configure the LAN network for the Prestige.

IP Address

Type the IP address of your Prestige in dotted decimal notation.

192.168.2.1

IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP

address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the Prestige.

255.255.255.0

RIP Direction

Press [SPACE BAR] to select RIP direction from Both/In Only/Out Only.

Version

Press [SPACE BAR] to select from RIP-1/RIP-2B/RIP-2M.

Incoming
Protocol Filters

Type the filter set(s) you want to apply to the incoming traffic between this
node and the Prestige.

Outgoing
Protocol Filters

Type the filter set(s) you want to apply to the outgoing traffic between this
node and the Prestige.

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Menu 3.2.1 - IP Alias Setup

                    IP Alias 1= No
                      IP Address= N/A
                      IP Subnet Mask= N/A
                      RIP Direction= N/A
                      Version= N/A
                      Incoming protocol filters= N/A
                      Outgoing protocol filters= N/A
                    IP Alias 2= No
                      IP Address= N/A
                      IP Subnet Mask= N/A
                      RIP Direction= N/A
                      Version= N/A
                      Incoming protocol filters= N/A
                      Outgoing protocol filters= N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.