ZyXEL Communications 782R User Manual
Prestige 782R G.SHDSL Router
4-6
Remote Node Configuration
Figure 4-4 Remote Node Network Layer Options
The next table shows you how to configure remote node network layer options.
Table 4-3 TCP/IP-related Fields in Menu 11.1 – Remote Node Profile
FIELD
DESCRIPTION
EXAMPLE
Route
Make sure IP is among the protocols in this field.
Rem IP Addr
Type the remote gateway IP address in Remote Node Profile. For a
valid IP address, fill in either the remote Prestige WAN IP address or
the remote Prestige LAN IP address depending on the remote WAN
IP settings. For example, if the remote WAN IP is set at 192.168.3.1,
then type 192.168.3.1 in the Rem IP Addr field. If the remote WAN
IP is 0.0.0.0, then type 192.168.1.1 in the Rem IP Addr field.
valid IP address, fill in either the remote Prestige WAN IP address or
the remote Prestige LAN IP address depending on the remote WAN
IP settings. For example, if the remote WAN IP is set at 192.168.3.1,
then type 192.168.3.1 in the Rem IP Addr field. If the remote WAN
IP is 0.0.0.0, then type 192.168.1.1 in the Rem IP Addr field.
Edit IP/IPX/
Bridge
Bridge
Press [SPACE BAR] to select Yes and press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options menu.
Menu 11.3 – Remote Node Network Layer Options menu.
Yes/No
Menu 11.3 - Remote Node Network Layer Options
IP Options: IPX Options:
Rem IP Addr: 0.0.0.0 Rem LAN Net #= N/A
Rem Subnet Mask= 0.0.0.0 My WAN Net #= N/A
My WAN Addr= 0.0.0.0 Hop Count= N/A
Single User Account= No Tick Count= N/A
Metric= 2
Private= No
RIP Direction= Both Bridge Options:
Version= RIP-2B Ethernet Addr Timeout (min)= 0
Multicast= IGMP-v2
IP Policies=
Rem IP Addr: 0.0.0.0 Rem LAN Net #= N/A
Rem Subnet Mask= 0.0.0.0 My WAN Net #= N/A
My WAN Addr= 0.0.0.0 Hop Count= N/A
Single User Account= No Tick Count= N/A
Metric= 2
Private= No
RIP Direction= Both Bridge Options:
Version= RIP-2B Ethernet Addr Timeout (min)= 0
Multicast= IGMP-v2
IP Policies=
Press ENTER to Confirm or ESC to Cancel: