ZyXEL Communications 782R User Manual
Prestige 782R G.SHDSL Router
6-4
IPX Configuration
6.3 IPX Ethernet Setup
From Menu 3 – Ethernet Setup, select option 3 to display Menu 3.3 – Novell IPX Ethernet Setup as
shown in the following example.
shown in the following example.
Figure 6-3 Menu 3.3 – Novell IPX Ethernet Setup
The following table describes the Novell IPX Ethernet Setup menu.
Table 6-1 Novell IPX Ethernet Setup Fields
FIELD
DESCRIPTION
OPTIONS
Seed Router
Determines if your Prestige is to act as a seed router.
Yes/No
Frame Type
Enable/Disable the individual frame type. Remember to enable only the
ones that are actually used on your network.
ones that are actually used on your network.
802.2/802.3/
Ethernet II/
SNAP
Ethernet II/
SNAP
IPX Network
#
#
If your Prestige is a seed router, type a unique network number for each
frame type enabled.
frame type enabled.
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC]
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
6.4 LAN-to-LAN Application With Novell IPX
A typical LAN-to-LAN application enables the stations in a branch office to access the NetWare servers at
Corporate headquarters as depicted in the following example.
Corporate headquarters as depicted in the following example.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
IPX Network #= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.