ZyXEL Communications P-2602R-DxA Series User Manual

P-2602R/RL-DxA Series User’s Guide

Chapter 18 Remote Management Configuration

207

The ZyXEL Device supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of 
the MIBs is to let administrators collect statistical data and monitor status and performance.

The ZyXEL Device will send traps to the SNMP manager when any one of the following 
events occurs:

To change your ZyXEL Device’s SNMP settings, click Advanced > Remote MGMT > 
SNMP. The screen appears as shown.

Table 77   SNMP Traps

0

coldStart (defined in RFC-1215)

A trap is sent after booting (power on).

1

warmStart (defined in RFC-1215)

A trap is sent after booting (software reboot).

4

authenticationFailure (defined in 

RFC-1215)

A trap is sent to the manager when receiving any 

SNMP get or set requirements with the wrong 

community (password).

6

whyReboot (defined in ZYXEL-

MIB)

A trap is sent with the reason of restart before 

rebooting when the system is going to restart (warm 

start).

6a

For intentional reboot:

A trap is sent with the message "System reboot by 

user!" if reboot is done intentionally, (for example, 

download new files, CI command "sys reboot", etc.).

6b

For fatal error: 

A trap is sent with the message of the fatal code if the 

system reboots because of fatal errors.