ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 7 WAN Screens

160

Figure 62   Advanced Setup

The following table describes the labels in this screen. 

Table 44   Advanced Setup 

AT Command 

Strings

Dial 

Type the AT Command string to make a call.

Drop

Type the AT Command string to drop a call. "~" represents a one second wait, for 

example, "~~~+++~~ath" can be used if your modem has a slow response time. 

Answer

Type the AT Command string to answer a call.

Drop DTR When 

Hang Up

Select this check box to have the ZyWALL drop the DTR (Data Terminal Ready) 

signal after the "AT Command String: Drop" is sent out.

AT Response 

Strings

CLID

Type the keyword that precedes the CLID (Calling Line Identification) in the AT 

response string. This lets the ZyWALL capture the CLID in the AT response string 

that comes from the WAN device. CLID is required for CLID authentication.

Called ID

Type the keyword preceding the dialed number.

Speed

Type the keyword preceding the connection speed.

Call Control