ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

193 

Chapter 9 Wireless LAN

Figure 81   Wireless Card: Static WEP

The following table describes the wireless LAN security labels in this screen.

Click the NETWORK and WIRELESS CARD to display the Wireless Card screen. Select 
WPA-PSK from the Security list.

Table 55   Wireless Card: Static WEP  

Security

Select Static WEP from the drop-down list.

WEP 

Encryption

WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized 

wireless stations from accessing data transmitted over the wireless network. 

 

Select 64-bit WEP or 128-bit WEP to enable data encryption.  

Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters 

(ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.

 

If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters 

(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
There are four data encryption keys to secure your data from eavesdropping by 

unauthorized wireless users. The values for the keys must be set up exactly the same 

on the access points as they are on the wireless stations.

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.