ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 9 Wireless LAN

196

Click the NETWORK and WIRELESS CARD to display the Wireless Card screen. Select 
802.1x + Dynamic WEP from the Security list.

Figure 84   Wireless Card: 802.1x + Dynamic WEP

The following wireless LAN security fields become available when you select 802.1x + 
Dynamic WEP in the Security drop down list-box.

Table 58   Wireless Card: 802.1x + Dynamic WEP

Security

Select 802.1x + Dynamic WEP from the drop-down list.

ReAuthentication 

Timer (Seconds)

Specify how often wireless stations have to resend user names and passwords in 

order to stay connected. Enter a time interval between 10 and 65535 seconds. 
If wireless station authentication is done using a RADIUS server, the 

reauthentication timer on the RADIUS server has priority. 

Idle Timeout 

(Seconds)

The ZyWALL automatically disconnects a wireless station from the wired network 

after a period of inactivity. The wireless station needs to enter the user name and 

password again before access to the wired network is allowed. 

Authentication 

Databases 

Click RADIUS to go to the RADIUS screen where you can configure the ZyWALL to 

check an external RADIUS server.

Dynamic WEP 

Key Exchange

Select 64-bit WEP or 128-bit WEP to enable data encryption. 

Apply

Click Apply to save your changes back to the ZyWALL.

Reset

Click Reset to begin configuring this screen afresh.