ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

453 

Chapter 27 Remote Management

If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not 
do any configurations directly to the ZyWALL (using either the web configurator, SMT 
menus or commands) without notifying the Vantage CNM administrator.

Vantage CNM is disabled on the device by default. Click ADVANCED, REMOTE MGMT 
in the navigation panel and then click the CNM tab to configure your device’s Vantage CNM 
settings.

Figure 229   CNM

The following table describes the labels in this screen. 

Table 160   CNM 

Registration 

Information

Registration Status

This read only field displays Not Registered when Enable is not selected.
It displays Registering when the ZyWALL first connects with the Vantage 

CNM server and then Registered after it has been successfully registered 

with the Vantage CNM server. It will continue to display Registering until it 

successfully registers with the Vantage CNM server. It will not be able to 

register with the Vantage CNM server if:
•

The Vantage CNM server is down. 

•

The Vantage CNM server IP address is incorrect. 

•

The Vantage CNM server is behind a NAT router or firewall that does not 

forward packets through to the Vantage CNM server. 

•

The encryption algorithms and/or encryption keys do not match between 

the ZyWALL and the Vantage CNM server.