ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 39 Wireless Setup

544

Use menu 7 to set up your ZyWALL as the wireless access point.

Note: If you are configuring the ZyWALL from a computer connected to the wireless 

LAN and you change the ZyWALL’s ESSID or WEP settings, you will lose your 
wireless connection when you press [ENTER] to confirm. You must then 
change the wireless settings of your computer to match the ZyWALL’s new 
settings.

From the main menu, enter 7 to open Menu 7 - WLAN Setup to configure the Wireless LAN 
setup. To edit the wireless LAN configuration, enter 1 to open Menu 7.1 - Wireless Setup as 
shown next.

Figure 298   Menu 7.1: Wireless Setup

Note: The settings of all client stations on the wireless LAN must match those of the 

ZyWALL.

Menu 7.1 - Wireless Setup

Enable Wireless LAN= No
Bridge Channel= WLAN

 

ESSID= ZyXEL
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
  Default Key= N/A
  Key1= N/A
  Key2= N/A
  Key3= N/A
  Key4= N/A
Edit MAC Address Filter= No

Press ENTER to Confirm or ESC to Cancel: