ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 46 System Information & Diagnosis

602

This section describes your system and allows you to choose different console port speeds. To 
get to the System Information and Console Port Speed:

1 Enter 24 to go to Menu 24 - System Maintenance. 

2 Enter 2 to open Menu 24.2 - System Information and Console Port Speed. 

3 From this menu you have two choices as shown in the next figure:

Figure 357   Menu 24.2: System Information and Console Port Speed

System Information gives you information about your system as shown below. More 
specifically, it gives you information on your routing protocol, Ethernet address, IP address, 
etc.

Rx B/s

This field shows the reception speed in Bytes per second on this port.

Up Time 

This is the total amount of time the line has been up.

Ethernet Address 

This is the Ethernet address of the port listed on the left.

IP Address

This is the IP address of the port listed on the left.

IP Mask

This is the IP mask of the port listed on the left.

DHCP

This is the DHCP setting of the port listed on the left.

System up Time

This is the total time the ZyWALL has been on.

CARD bridged to

This field shows whether the wireless card is set to be part of the LAN, DMZ or 

WLAN.

You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.

Table 226   System Maintenance: Status Menu Fields (continued)

Menu 24.2 - System Information and Console Port Speed     

       1. System Information
       2. Console Port Speed

Please enter selection: