ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

615 

Chapter 47 Firmware and Configuration File Maintenance

Figure 367   FTP Session Example

The following table describes some of the commands that you may see in GUI-based FTP 
clients.

TFTP, FTP and Telnet over the WAN will not work when: 

1 The firewall is active (turn the firewall off in menu 21.2 or create a firewall rule to allow 

access from the WAN).

2 You have disabled Telnet service in menu 24.11. 

3 You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet 

service. 

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 
297.89Kbytes/sec.
ftp> quit

Table 231   General Commands for GUI-based FTP Clients 

Host Address

Enter the address of the host server.

Login Type

Anonymous. 
This is when a user I.D. and password is automatically supplied to the server 

for anonymous access. Anonymous logins will work only if your ISP or 

service administrator has enabled this option.
Normal.  
The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode. 

Configuration and firmware files should be transferred in binary mode

Initial Remote Directory

Specify the default remote directory (path).

Initial Local Directory

Specify the default local directory (path).