ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

629 

Chapter 48 System Maintenance Menus 8 to 10

The required fields in a command are enclosed in angle brackets <>. 

The optional fields in a command are enclosed in square brackets [].

The |symbol means “or”.

For example,

sys filter netbios config <type> <on|off>

means that you must specify the type of netbios filter and whether to turn it on or off.

A list of commands can be found by typing help or ? at the command prompt. Always type 

the full command. Type exit to return to the SMT main menu when finished.

Figure 386   Valid Commands

The following table describes some commands in this screen.

Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys             ls              exit            device
ether           poe             pptp            aux
config          ip              ipsec           ppp
bridge          bm              certificates    idp
av              as              cnm             8021x
radius
ras>

Table 233   Valid Commands

sys

The system commands display device information and configure device settings.

exit

This command returns you to the SMT main menu.

ether

These commands display Ethernet information and configure Ethernet settings.

aux

These commands display dial backup information and control dial backup connections.

ip

These commands display IP information and configure IP settings.

ipsec

These commands display IPSec information and configure IPSec settings.

bridge

These commands display bridge information.

bm

These commands configure bandwidth management settings and display bandwidth 

management information. 

certificates

These commands display certificate information and configure certificate settings.

8021x

These commands configure 802.1x settings and display 802.1x information.

radius

These commands display RADIUS information and configure RADIUS settings.