ZyXEL Communications 802.11b/g/n poe access point User Manual
Chapter 2 Introducing the Web Configurator
NWA1100-N User’s Guide
21
default configuration file. This means that you will lose all the settings you previously configured.
The password will be reset to “1234”.
The password will be reset to “1234”.
Figure 12
The RESET Button
2.2.1 Methods of Restoring Factory-Defaults
You can erase the current configuration and restore factory defaults in two ways:
Use the RESET button to upload the default configuration file. Hold this button in for about 10
seconds (the lights will begin to blink). Use this method for cases when the password or IP address
of the NWA is not known.
seconds (the lights will begin to blink). Use this method for cases when the password or IP address
of the NWA is not known.
Use the web configurator to restore defaults (refer to
2.3 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Status screen.