ZyXEL Communications ZyWALL 300 User Manual

 Chapter 38 AAA Server

ZyWALL USG 300 User’s Guide

The following table describes the labels in this screen. 

Table 181   Object > AAA Server > RADIUS > Group > Add

Configuration

All RADIUS servers in a group share the same settings in the fields below. 

Name

Enter a descriptive name (up to 63 alphanumeric characters) for identification 
purposes. 

Key

Enter a password (up to 15 alphanumeric characters) as the key to be shared 
between the external authentication server and the ZyWALL. 
The key is not sent over the network. This key must be the same on the external 
authentication server and the ZyWALL. 

Timeout

Specify the timeout period (between 1 and 300 seconds) before the ZyWALL 
disconnects from the RADIUS server. In this case, user authentication fails. 
Search timeout occurs when either the user information is not in the RADIUS 
server or the RADIUS server is down. 

Host Members

The ordering of the RADIUS servers is important as the ZyWALL uses the 
RADIUS servers for user authentication in the order they appear in this table. 

#

This field displays the index number. 

Members

Enter the IP address (in dotted decimal notation) or the domain name (up to 63 
alphanumeric characters) of a RADIUS server. 

Authentication 
Port

The default port of the RADIUS server for authentication is 1812. 
You need not change this value unless your network administrator instructs you to 
do so with additional information.

Add icon

Click Add to add a new RADIUS server. You can add up to four RADIUS member 
servers. 
Click Delete to remove a RADIUS server. 

OK

Click OK to save the changes. 

Cancel Click 

Cancel to discard the changes.