ZyXEL Communications ZyWALL 300 User Manual

 Chapter 47 Reports

ZyWALL USG 300 User’s Guide

Traffic Type

Select the type of report to display. Choices are:
Host IP Address/User - displays the IP addresses or users with the most traffic 
and how much traffic has been sent to and from each one.
Service/Port - displays the most-used protocols or service ports and the amount of 
traffic for each one.
Web Site Hits - displays the most-visited Web sites and how many times each one 
has been visited.
Each type of report has different information in the report (below).

Refresh

Click this button to update the report display.

Flush Data

Click this button to discard the report data for the selected interface and update the 
report display.

These fields are available when the Traffic Type is Host IP Address/User.

#

This field is the rank of each record. The IP addresses and users are sorted by the 
amount of traffic.

IP Address/
User

This field displays the IP address or user in this record. The maximum number of IP 
addresses or users in this report is indicated in 

.

Direction

This field indicates whether the IP address or user is sending or receiving traffic. 
Choices are Incoming and Outgoing.
Incoming - traffic is coming from the IP address or user to the ZyWALL.
Outgoing - traffic is going from the ZyWALL to the IP address or user.

Amount

This field displays how much traffic was sent or received from the indicated IP 
address or user. If the Direction is Incoming, a red bar is displayed; if the 
Direction is Outgoing, a blue bar is displayed. The unit of measure is bytes, 
Kbytes, Mbytes or Gbytes, depending on the amount of traffic for the particular IP 
address or user. The count starts over at zero if the number of bytes passes the 
byte count limit. See 

These fields are available when the Report Type is Service/Port.

#

This field is the rank of each record. The protocols and service ports are sorted by 
the amount of traffic. 

Service/Port

This field displays the protocol or service port in this record. The maximum number 
of protocols or service ports in this report is indicated in 

Direction

This field indicates whether the indicated protocol or service port is sending or 
receiving traffic. Choices are Incoming and Outgoing.
Incoming - traffic is coming into the router through the interface
Outgoing - traffic is going out from the router through the interface

Amount

This field displays how much traffic was sent or received from the indicated service 
/ port. If the Direction is Incoming, a red bar is displayed; if the Direction is 
Outgoing, a blue bar is displayed. The unit of measure is bytes, Kbytes, Mbytes, 
Gbytes, or Tbytes, depending on the amount of traffic for the particular protocol or 
service port. The count starts over at zero if the number of bytes passes the byte 
count limit. See 

.

These fields are available when the Report Type is Web Site Hits.

#

This field is the rank of each record. The domain names are sorted by the number 
of hits.

Table 225   Maintenance > Report > Traffic (continued)