ZyXEL Communications ZyWALL 300 User Manual
Chapter 4 Wizard Setup
ZyWALL USG 300 User’s Guide
79
Figure 18 Ethernet Encapsulation: Static
The following table describes the labels in this screen.
The ZyWALL applies the configuration settings.
Table 8 Ethernet Encapsulation: Static
LABEL
DESCRIPTION
ISP Parameters
Encapsulation
This displays the type of Internet connection you are configuring.
WAN IP Address
Assignments
Assignments
WAN Interface
This displays the identity of the interface you configure to connect with your ISP.
Zone
This field displays to which security zone this interface and Internet connection will
belong.
belong.
IP Address
Enter the IP address that your ISP gave you. This should be a static, public IP
address.
address.
IP Subnet Mask
Enter the subnet mask for the IP address.
Gateway IP
Address
Address
Enter the IP address of the router through which this WAN connection will send
traffic (the default gateway).
traffic (the default gateway).
First DNS Server
Second DNS
Server
Second DNS
Server
DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because without
it, you must know the IP address of a computer before you can access it. The
ZyWALL uses a system DNS server (in the order you specify here) to resolve
domain names for VPN, DDNS and the time server.
Enter the DNS server IP addresses.
IP address and vice versa. The DNS server is extremely important because without
it, you must know the IP address of a computer before you can access it. The
ZyWALL uses a system DNS server (in the order you specify here) to resolve
domain names for VPN, DDNS and the time server.
Enter the DNS server IP addresses.
Next
Click Next to continue.