ZyXEL Communications ZyWALL 300 User Manual

Chapter 4 Wizard Setup

ZyWALL USG 300 User’s Guide

"

Enter the Internet access information exactly as given to you by your ISP.

Type the PPPoE Service Name from your service provider. 

Type the User Name given to you by your ISP.

Type the Password associated with the user name.

Select Nailed-Up if you do not want the connection to time out. Otherwise, type the Idle 
Timeout in seconds that elapses before the router automatically disconnects from the PPPoE 
server. 

You do not configure this section if you selected Auto as the IP Address Assignment in the 
previous screen. 

WAN Interface: This is the number of the interface that will connect with your ISP.

Zone: This is the security zone to which this interface and Internet connection will belong.

IP Address: Enter your (static) public IP address.

DNS Server: The Domain Name System (DNS) maps a domain name to an IP address and 
vice versa. Enter a DNS server's IP address(es). The ZyWALL uses these (in the order you 
specify here) to resolve domain names for VPN, DDNS and the time server.

First DNS Server
Second DNS 
Server

Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not 
configure a DNS server, you must know the IP address of a machine in order to 
access it.

Next

Click Next to continue. 

Table 10   PPPoE Encapsulation: Static (continued)