ZyXEL Communications 782M User Manual
P782M G.SHDSL Bridge
Figure 5-2 Menu 11.6 — Remote Node ATM Layer Options
Refer to Chapter 3 for field descriptions found in the last figure.
The following table contains instructions on how to configure your Prestige for Internet access.
Table 5-1 Fields in Menu 11.6 — Remote Node ATM Layer Options
FIELD
DESCRIPTION
EXAMPLE
VPI #
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
company gives you.
8
VCI #
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
company gives you.
35
Peak Cell Rate (PCR) This is the maximum rate at which the sender can send cells.
Type the PCR.
0
Sustain Cell Rate
(SCR)= 0
(SCR)= 0
Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be less
than the PCR.
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be less
than the PCR.
0
Maximum Burst Size
(MBS)= 0
(MBS)= 0
Refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS. The MBS must be less than 65535.
peak rate. Type the MBS. The MBS must be less than 65535.
0
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [
ESC
] at any time to cancel.
Menu 11.6 - Remote Node ATM Layer Options
VPI #= 8
VCI #= 38
Peak Cell Rate (cell/sec)= 5500
Peak Cell Rate (cell/sec)= 5500
Sustain Cell Rate (cell/sec)= 0
Maximum Burst Size (cell)= 0
ENTER here to CONFIRM or ESC to CANCEL:
Remote Node TCP/IP Configuration
5-3