ZyXEL Communications 782M User Manual
P782M G.SHDSL Bridge
This setting logs all packets that match these
rule parameters.
rule parameters.
Select Forward here so that the packet will be
forwarded if the action is matched.
forwarded if the action is matched.
Select Drop here so that the packet will be
dropped if the action is not matched.
dropped if the action is not matched.
There are no more rules to check in this filter set.
Enter the value (in hex) to compare with the data
portion.
portion.
The Mask is applied to the data portion before
comparing the result against the Value to
determine a match. It is specified in
hexadecimal, and it takes two hexadecimal digits
to represent a byte i.e., Length is 4, therefore
there are 8 hex numbers.
comparing the result against the Value to
determine a match. It is specified in
hexadecimal, and it takes two hexadecimal digits
to represent a byte i.e., Length is 4, therefore
there are 8 hex numbers.
.This is the first byte of the data portion in
the packet that you want to compare.
the packet that you want to compare.
Select Yes to make
the rule active.
the rule active.
Menu 21.3.1 – Generic Filter Rule
Filter #: 3,1
Filter Type= Generic Filter Rule
Active=
Yes
Offset=
9
Length=
4
Mask=
789abcde
Value=
789abcde
More= No Log= None
Action Matched= Drop
Action Not Matched= Forward
Press ENTER to Confirm or ESC to Cancel:
This is the length (in bytes) of the data portion
in the packet that you want to compare.
in the packet that you want to compare.
Figure 6-6 Sample Filter — Menu 21.3.1
When you press [ENTER] to confirm, you will see the next screen. Note that there is only one filter rule in
this set.
this set.
Filter Set Configuration
6-9