ZyXEL Communications 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router 

4-8  

Remote 

Node 

Configuration 

IP Policies 

You can apply up to four IP Policy sets (from 12) by typing in their 
numbers separated by commas. Configure the filter sets in menu 25 
first (see the IP Policy Routing chapter) and then apply them here. 

3, 4, 5, 6 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press 
[ENTER] to display Menu 11.5 – Remote Node Filter. 

Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing 
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls. 
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field. 

Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that 
blocks NetBIOS packets (call protocol filter = 1). Include this in the call filter sets if you want to prevent 
NetBIOS packets from triggering calls to a remote node. 

Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation. 

Menu 11.5 - Remote Node Filter 

  

                     Input Filter Sets: 
                      protocol filters= 

                        device filters= 

                    Output Filter Sets: 

                      protocol filters= 

                        device filters= 

                      Call Filter Sets: 
                      protocol filters= 

                        device filters=