ZyXEL Communications 650R-31/33 User Manual

Prestige 650R-31/33 ADSL Router 

5-4 

 

Remote Node TCP/IP Configuration 

The following table shows the fields in Menu 11.3 – Remote Node Network Layer Options. 

IP Address 
Assignment 

Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote 
node is using a dynamically assigned IP address or Static if it is using a 
static (fixed) IP address. You will only be able to configure this in the 
ISP node (the first node); all other nodes are set to Static. 

Dynamic 

Rem IP Addr 

This is the IP address of the remote gateway. Type the remote 
Prestige’s WAN IP address here (172.16.02 in the example Figure 5-3 
shown previously).  If the remote Prestige’s WAN IP address is 0.0.0.0, 
then type 192.168.1.1 (its LAN IP address) here. 

0.0.0.0 

(default) 

Rem Subnet 
Mask 

Type the subnet mask assigned to the remote node. 

0.0.0.0 

(default) 

My WAN Addr 

Some implementations, especially UNIX derivatives, require separate 
IP network numbers for the WAN and LAN links and each end to have a 
unique address within the WAN network number. In that case, type the 
IP address assigned to the WAN port of your Prestige. 

NOTE: Refers to local Prestige address, not the remote router address. 

 

NAT 

Press [SPACE BAR] and then [ENTER] to select Full Feature if you 
have multiple public WAN IP addresses for your Prestige.  

                  Menu 11.3 - Remote Node Network Layer Options 

 

     IP Options:                          Bridge Options: 

       IP Address Assignment = Dynamic      Ethernet Addr Timeout(min)= N/A 
       Rem IP Addr = 0.0.0.0 

       Rem Subnet Mask= 0.0.0.0 

       My WAN Addr= N/A 

       NAT= Full Feature 

         Address Mapping Set= 1 

       Metric= 2 
       Private= No 

       RIP Direction= None 

         Version= RIP-1 

       Multicast= None 

       IP Policies= 

 
                     Enter here to CONFIRM or ESC to CANCEL: