ZyXEL Communications 650R-31/33 User Manual
Prestige 650R-31/33 ADSL Router
Remote Node TCP/IP Configuration
5-7
Step 2. From menu 12, enter 1 to open Menu 12.1 – IP Static Route Setup (shown next).
Figure 5-7 Menu 12.1 – IP Static Route Setup
Step 3.
Type the route number of a static route you want to configure and then press [ENTER].
Figure 5-8 Edit IP Static Route
The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.
Table 5-3 Edit IP Static Route Menu Fields
FIELD DESCRIPTION
Route #
This is the index number of the static route that you chose in menu 12.1.
Route Name
Type a descriptive name for this route. This is for identification purpose only.
Active
This field allows you to activate/deactivate this static route.
Destination IP Address
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a route to
a single host, use a subnet mask of 255.255.255.255 in the subnet mask field
to force the network number to be identical to the host ID.
Routing is always based on network number. If you need to specify a route to
a single host, use a subnet mask of 255.255.255.255 in the subnet mask field
to force the network number to be identical to the host ID.
Menu 12.1 - IP Static Route Setup
1. ________
2. ________
3. ________
4. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number:
Menu 12.1.1 - Edit IP Static Route
Route #: 1
Route Name= ?
Active= No
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel: