ZyXEL Communications 650R-31/33 User Manual
Prestige 650R-31/33 ADSL Router
Bridging Setup
6-3
Figure 6-2 Menu 12.3.1 – Edit Bridge Static Route
The following table describes the Edit Bridge Static Route menu.
Table 6-2 Edit Bridge Static Route Menu Fields
FIELD DESCRIPTION
Route #
This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name
Type a name for the bridge static route for identification purposes.
Active
Indicates whether the static route is active (Yes) or not (No).
Ether Address
Type the MAC address of the destination computer that you want to bridge the
packets to.
packets to.
IP Address
If available, type the IP address of the destination computer that you want to bridge
the packets to.
the packets to.
Gateway Node
Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
to eight) that is the gateway of this static route.
to eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name=
Active= No
Ether Address= ?
IP Address=
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel: