ZyXEL Communications 652 User Manual
Prestige 652 ADSL Security Router
Hardware Installation and Initial Setup
2-9
2.8.2 Procedure To Use The Reset Button
Make sure the SYS led is on (not blinking) before you begin this procedure.
1. Press
the
RESET button for ten seconds, then release it. If the SYS LED begins to blink, the
defaults have been restored and the Prestige restarts. Otherwise, go to step 2.
2. Turn the Prestige off.
3. While
pressing
the
RESET button, turn the Prestige on.
4. Continue to hold the RESET button. The SYS LED will begin to blink and
flicker very quickly
after about 10 or 15 seconds. This indicates that the defaults have been restored and the Prestige is
now restarting.
now restarting.
Release the RESET
button and wait for the Prestige to finish restarting.