ZyXEL Communications 652 User Manual

Prestige 652 ADSL Security Router

Internet Access

4-7

Pressing [ENTER] displays Menu 3.2.1 - IP Alias Setup, as shown next.

Follow the instructions in the following table to configure IP Alias parameters.

IP Alias (1 or 2) Choose Yes to configure the LAN network for the Prestige.

IP Address

Enter the IP address of your Prestige in dotted decimal notation

192.168.2.1

IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on

the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige

255.255.255.0

RIP Direction

Press [

SPACE BAR

] to select the RIP direction.  Choices are None,

Both, In Only or Out Only.

Version

Press [

SPACE BAR]

 to select the RIP version. Choices are RIP-1,

RIP-2B or RIP-2M.

Incoming
Protocol Filters

Enter the filter set(s) you wish to apply to the incoming traffic
between this node and the Prestige.

Outgoing
Protocol Filters

Enter the filter set(s) you wish to apply to the outgoing traffic between
this node and the Prestige.

When you have completed this menu, press [

ENTER

] at the prompt “Press ENTER to Confirm…” to

save your configuration, or press [

ESC

] at any time to cancel.

Menu 3.2.1 - IP Alias Setup

                    IP Alias 1= No

                      IP Address= N/A

                      IP Subnet Mask= N/A

                      RIP Direction= N/A

                      Version= N/A

                      Incoming protocol filters= N/A

                      Outgoing protocol filters= N/A

                    IP Alias 2= No

                      IP Address= N/A

                      IP Subnet Mask= N/A

                      RIP Direction= N/A

                      Version= N/A

                      Incoming protocol filters= N/A

                      Outgoing protocol filters= N/A

                     Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.