ZyXEL Communications 652 User Manual

Prestige 652 ADSL Security Router

Remote Node Configuration

5-3

In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.

Rem Node Name

Type a unique, descriptive name of up to eight characters for this
node.

ChangeMe

Active

Press [SPACE BAR] and then [ENTER] to select Yes to activate or
No to deactivate this node. Inactive nodes are displayed with a
minus sign “–“.

Encapsulation

RFC-1483 is the default configuration, press [SPACE BAR] and
then [ENTER] to select either PPPoE, PPP

oA (RFC-2364, PPP

Encapsulation over ATM Adaptation Layer 5) or ENET ENCAP.   

oA refers to RFC-2364 (PPP Encapsulation over ATM Adaptation

Layer 5).

PPPoE refers to RFC-2364 (Point-to-Point Protocol over Ethernet).
If RFC-1483 (Multiprotocol Encapsulation over ATM Adaptation
Layer 5) or ENET ENCAP is selected, then the Rem Login, Rem
Password, My Login, My Password, Telco Options and Idle
Timeout fields are not applicable (N/A).

Multiplexing

Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either VC-based or LLC-based.

Menu 11.1 - Remote Node Profile

     Rem Node Name= ChangeMe

     Active= Yes

     Encapsulation= PPP

     Multiplexing= LLC-based
     Service Name= N/A

     Incoming:

       Rem Login=

       Rem Password= ********

     Outgoing:

       My Login=
       My Password= ********

       Authen= CHAP/PAP

Route= IP

Bridge= No

Edit IP/Bridge= No

Edit ATM Options= No

Telco Option:

  Allocated Budget(min)= 0

  Period (hr)= 0

  Schedule Sets= N/A

  Nailed-Up Connection= N/A
Session Options:

  Edit Filter Sets= No

  Idle Timeout (sec)= 0

Press ENTER to Confirm or ESC to Cancel: