ZyXEL Communications 652 User Manual

Prestige 652 ADSL Security Router

5-6

Remote Node Configuration

The next table explains fields in Menu 11.3 

 Remote Node Network Layer Options.

IP Address
Assignment

Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
node is using a dynamically assigned IP address, or Static if it is using
a static (fixed) IP address. You will only be able to configure this in the
ISP node (also the one you configure in menu 4), all other nodes are
set to Static.

Rem IP Addr

This is the IP address you entered in the previous menu.

Rem Subnet
Mask

Type the subnet mask assigned to the remote node.

My WAN Addr

Some implementations, especially UNIX derivatives, require separate
IP network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your Prestige.

NOTE: Refers to local Prestige address, not the remote router address.

NAT
(Network
Address
Translation)

Press [SPACE BAR] and then [ENTER] to select Full Feature if you
have multiple public WAN IP addresses for your Prestige. Select SUA
Only if you have just one public WAN IP address for your Prestige. The
SMT uses Address Mapping Set 255 (menu 15.1 - see section 8.3.1).

Select None to disable NAT.

Address

When Full Feature is selected in the NAT field, configure address

2

Menu 11.3 - Remote Node Network Layer Options

  IP Options:                        Bridge Options:

    IP Address Assignment= Static      Ethernet Addr Timeout(min)= 0

    Rem IP Addr: 0.0.0.0

    Rem Subnet Mask= 0.0.0.0

    My WAN Addr= 0.0.0.0

    NAT= SUA Only

      Address Mapping Set=2

    Metric= 2

    Private= No

    RIP Direction= None

      Version= RIP-1

    Multicast= None

    IP Policies= 3,4,5,6

Press ENTER to Confirm or ESC to Cancel: