ZyXEL Communications Wireless Gateway Series User Manual

Page of 420
ZyAIR Wireless Gateway Series User’s Guide 
30-2                                                                                                                 Remote Management 
30.4.1 Remote Management Setup 
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service 
port, access interface and the secured client IP address to enhance security and flexibility. 
You may manage your ZyAIR from a remote location via: 
 the Internet (WAN only), the LAN onlyAll (LAN and WAN) or Disable (neither). 
 
WAN only (Internet) 
 
ALL (LAN and WAN) 
 
LAN only 
 
Disable (Neither) 
If you enable remote management of a service, but have applied a filter to block 
the service, then you will not be able to remotely manage the service. 
Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown next).  
Figure 30-2 Menu 24.11 Remote Management Control 
The following table describes the fields in this menu. 
 
 
 
 
 
 
                     Menu 24.11 - Remote Management Control 
 
     TELNET Server:     Port = 23         Access = LAN only 
                        Secured Client IP = 0.0.0.0 
 
     FTP Server:        Port = 21         Access = LAN only 
                        Secured Client IP = 0.0.0.0 
 
     Web Server:        Port = 80         Access = LAN only 
                        Secured Client IP = 0.0.0.0 
 
     SNMP Service:      Port = 161        Access = ALL 
                        Secured Client IP = 0.0.0.0 
 
     DNS Service:       Port = 53         Access = ALL 
                        Secured Client IP = 0.0.0.0 
 
 
                    Press ENTER to Confirm or ESC to Cancel: