ZyXEL Communications ZLD User Manual

 Chapter 1 Command Line Interface

ZyWALL (ZLD) CLI Reference Guide

Use the following steps to Telnet into your ZyWALL.

If your computer is connected to the ZyWALL over the Internet, skip to the next step. Make sure 
your computer IP address and the ZyWALL IP address are on the same subnet. 

In Windows, click Start (usually in the bottom left corner) and Run. Then type 

telnet 

and the 

ZyWALL’s IP address. For example, enter 

telnet 192.168.1.1

 (the default management IP 

address).

Click OK. A login screen displays. Enter the user name and password at the prompts.

Note: The default login username is admin and password is 1234. The username and 

password are case-sensitive.

You can use an SSH client program to access the CLI. The following figure shows an example using 
a text-based SSH client program. Refer to the documentation that comes with your SSH program 
for information on using it. 

Note: The default login username is admin and password is 1234. The username and 

password are case-sensitive.

SSH Login Example 

You can simply look for the feature chapter to find commands. In addition, you can use the 

 at the end of the guide.  This section lists the commands in alphabetical 

order that they appear in this guide.

If you are looking at the CLI Reference Guide electronically, you might have additional options (for 
example, bookmarks or Find...) as well.

C:\>ssh2 admin@192.168.1.1

Host key not found from database.

Key fingerprint:

xolor-takel-fipef-zevit-visom-gydog-vetan-bisol-lysob-cuvun-muxex

You can get a public key's fingerprint by running

% ssh-keygen -F publickey.pub

on the keyfile.

Are you sure you want to continue connecting (yes/no)? yes

Host key saved to C:/Documents and Settings/user/Application Data/SSH/hostkeys/

ey_22_192.168.1.1.pub

host key for 192.168.1.1, accepted by user Tue Aug 09 2005 07:38:28

admin's password:

Authentication successful.