ZyXEL Communications 662HW User Manual

Prestige 662HW Series Compact Guide 

5

 

CON/AUX 
switch 
CON/AUX 
port 

Only connect this port if you want to configure the Prestige using the 
SMT via console port see your User's Guide for details. 

Set this switch to the CON side to use the CON/AUX port as a console 
port for local device configuration and management. Connect the RJ-45 
end of the console cable to the console port of the Prestige and the 
other end to a serial port (COM1, COM2 or other COM port) on your 
computer. Your computer should have a terminal emulation 
communications program (such as HyperTerminal) set to VT100 
terminal emulation, no parity, 8 data bits, 1 stop bit, no flow control and 
9600 bps port speed. 

The console port is also an auxiliary WAN port. Push the CON/AUX 
switch to AUX and connect the CON/AUX port to your modem or TA. 

RESET 

You only need to use this button if you’ve forgotten the Prestige’s 
password. It returns the Prestige to the factory defaults (password is 
1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for 
details). 

 

Refer to the following table for more detailed LED descriptions.  

PWR/SYS  Green 

On 

The Prestige is receiving power and functioning 
properly.