ZyXEL Communications P-2608HWL-Dx Series User Manual

P-2608HWL-Dx Series User’s Guide

100

Chapter 7 WAN Setup

Figure 49   WAN More Connections > Modify

The following table describes the labels in this screen.  

Table 27   WAN More Connections > Modify

General

Active

Use this checkbox to activate or deactivate this WAN connection.

Name

Give a name to this WAN connection. This if for descriptive purposes only.

Mode

Select Routing (default) from the drop-down list box if your ISP allows multiple 

computers to share an Internet account. Otherwise select Bridge. 

Encapsulation

Select the method of encapsulation used by your ISP from the drop-down list box. 

Choices vary depending on the mode you select in the Mode field. 
If you select Bridge in the Mode field, select either PPPoA or RFC 1483. 
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP 

or PPPoE.

User Name

(PPPoA and PPPoE encapsulation only) Enter the user name exactly as your ISP 

assigned. If assigned a name in the form user@domain where domain identifies a 

service name, then enter both components exactly as given.

Password

(PPPoA and PPPoE encapsulation only) Enter the password associated with the 

user name above.

Service Name

(PPPoE only) Type the name of your PPPoE service here.