ZyXEL Communications P-660HN-F1 User Manual

 Chapter 7 Wireless LAN

P-660HN-F1 User’s Guide

Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.

WPS allows you to quickly set up a wireless network with strong security, without having to 
configure security settings manually. Set up each WPS connection between two devices. Both 
devices must support WPS.

Click Network > Wireless LAN > WPS. The following screen displays.

Figure 57   Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Edit

Click this to go to the MAC Filter screen to configure MAC filter settings. See 

 for more details.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Table 36   Network > Wireless LAN > More AP: Edit

Table 37   Network > Wireless LAN > WPS

WPS Setup

Enable WPS

Select the check box to activate WPS on the ZyXEL Device.

PIN Number

This shows the PIN (Personal Identification Number) of the ZyXEL Device. Enter 
this PIN in the configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.

Generate

Click this to have the ZyXEL Device create a new PIN. 

WPS Status

This displays Configured when the ZyXEL Device has connected to a wireless 
network using WPS or Enable WPS is selected and wireless or wireless security 
settings have been changed. The current wireless and wireless security settings 
also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless or wireless 
security changes on the ZyXEL Device or you click Release_Configuration to 
remove the configured wireless and wireless security settings.