ZyXEL Communications P-660HN-F1 User Manual

Chapter 13 Static Route

P-660HN-F1 User’s Guide

Use this screen to view the static route rules. Click Advanced > Static Route to open the 
Static Route screen.

Figure 123   Advanced > Static Route

The following table describes the labels in this screen. 

Table 78   Advanced > Static Route

#

This is the number of an individual static route.

Active

This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable it.

Name

This is the name that describes or identifies this route. 

Destination

This parameter specifies the IP network address of the final destination. Routing is 
always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 
network segment as the device's LAN or WAN port. The gateway helps forward 
packets to their destinations.

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

Modify

Click the Edit icon to go to the screen where you can set up a static route on the 
ZyXEL Device.
Click the Remove icon to remove a static route from the ZyXEL Device. A window 
displays asking you to confirm that you want to delete the route. 

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.