ZyXEL Communications P-660HN-F1 User Manual
Chapter 17 Remote Management
P-660HN-F1 User’s Guide
248
17.2.2 Configuring the WWW Screen
Click Advanced > Remote MGMT to display the WWW screen.
Figure 145 Advanced > Remote Management > WWW
The following table describes the labels in this screen.
Table 90 Advanced > Remote Management > WWW
LABEL
DESCRIPTION
WWW
Port
You may change the server port number for a service, if needed. However, you
must use the same port number in order to use that service for remote
management.
must use the same port number in order to use that service for remote
management.
Access Status
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
using this service.
Secured Client IP
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
HTTPS
Server Host Key
Select the Server Host Key that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Authenticate
Client Certificates
Client Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device.
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device.
Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
use the same port number in order to use that service for remote management.
Access Status
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
using this service.