ZyXEL Communications P-660HN-F1 User Manual

Chapter 3 Status Screens

P-660HN-F1 User’s Guide

Click Status > AnyIP Table to access this screen. Use this screen to view the IP address and 
MAC address of each computer that is using the ZyXEL Device but is in a different subnet 
than the ZyXEL Device.

Figure 10   Any IP Table

Each field is described in the following table.

Rx B/s

This field displays the number of bytes received in the last second.

Up Time 

This field displays the elapsed time this port has been up. 

LAN Port Statistics

Interface

This field displays either Ethernet (LAN ports) or Wireless (WLAN port).

Status

For the LAN ports, this field displays Down (line is down) or Up (line is up or 
connected).
For the WLAN port, it displays the transmission rate when WLAN is enabled or  
N/A when WLAN is disabled.

TxPkts

This field displays the number of packets transmitted on this interface.

RxPkts

This field displays the number of packets received on this interface.

Collisions

This is the number of collisions on this interfaces.

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this to apply the new poll interval you entered in the Poll Interval field 
above.

Stop

Click this to halt the refreshing of the system statistics.

Table 6   Packet Statistics (continued)

Table 7   Any IP Table

#

This field is a sequential value. It is not associated with a specific entry.

IP Address

This field displays the IP address of each computer that is using the ZyXEL Device 
but is in a different subnet than the ZyXEL Device.

MAC Address

This field displays the MAC address of the computer that is using the ZyXEL 
Device but is in a different subnet than the ZyXEL Device.

Refresh

Click this to update this screen.