ZyXEL Communications P-660HN-F1 User Manual
Chapter 6 LAN Setup
P-660HN-F1 User’s Guide
94
Figure 42 Network > LAN > DHCP Setup
The following table describes the labels in this screen.
Table 25 Network > LAN > DHCP Setup
LABEL
DESCRIPTION
DHCP Setup
DHCP
If set to Server, your ZyXEL Device can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients.
Enter the IP address of the actual, remote DHCP server in the Remote DHCP
Server field in this case.
When DHCP is used, the following items need to be set:
gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients.
Enter the IP address of the actual, remote DHCP server in the Remote DHCP
Server field in this case.
When DHCP is used, the following items need to be set:
IP Pool Starting
Address
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Pool Size
This field specifies the size, or count of the IP address pool.
Remote DHCP
Server
Server
If Relay is selected in the DHCP field above then enter the IP address of the
actual remote DHCP server here.
actual remote DHCP server here.
DNS Server
DNS Servers
Assigned by DHCP
Server
Assigned by DHCP
Server
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.
the DHCP clients.