ZyXEL Communications USG 2000 User Manual
Chapter 10 Monitor
ZyWALL USG 2000 User’s Guide
229
HA Status
This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right now.
For example, this might happen if the interface is down.
For example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
Zone
This field displays the zone to which the interface is assigned.
IP Addr/
Netmask
Netmask
This field displays the current IP address and subnet mask assigned to
the interface. If the IP address and subnet mask are 0.0.0.0, the
interface is disabled or did not receive an IP address and subnet mask
via DHCP.
the interface. If the IP address and subnet mask are 0.0.0.0, the
interface is disabled or did not receive an IP address and subnet mask
via DHCP.
If this interface is a member of an active virtual router, this field displays
the IP address it is currently using. This is either the static IP address of
the interface (if it is the master) or the management IP address (if it is a
backup).
the IP address it is currently using. This is either the static IP address of
the interface (if it is the master) or the management IP address (if it is a
backup).
IP Assignment
This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Dynamic - This is the auxiliary interface.
Services
This field lists which services the interface provides to the network.
Examples include DHCP relay, DHCP server, DDNS, RIP, and OSPF.
This field displays n/a if the interface does not provide any services to
the network.
Examples include DHCP relay, DHCP server, DDNS, RIP, and OSPF.
This field displays n/a if the interface does not provide any services to
the network.
Action
Use this field to get or to update the IP address for the interface. Click
Renew to send a new DHCP request to a DHCP server. Click Connect to
try to connect the auxiliary interface or a PPPoE/PPTP interface. If the
interface cannot use one of these ways to get or to update its IP
address, this field displays n/a.
Renew to send a new DHCP request to a DHCP server. Click Connect to
try to connect the auxiliary interface or a PPPoE/PPTP interface. If the
interface cannot use one of these ways to get or to update its IP
address, this field displays n/a.
Interface
Statistics
Statistics
This table provides packet statistics for each interface.
Refresh
Click this button to update the information in the screen.
Expand/Close
Click this button to show or hide statistics for all the virtual interfaces on
top of the Ethernet interfaces.
top of the Ethernet interfaces.
Name
This field displays the name of each interface. If there is a Expand icon
(plus-sign) next to the name, click this to look at the statistics for
virtual interfaces on top of this interface.
(plus-sign) next to the name, click this to look at the statistics for
virtual interfaces on top of this interface.
Status
This field displays the current status of the interface.
Down - The interface is not connected.
Speed / Duplex - The interface is connected. This field displays the
port speed and duplex setting (Full or Half).
port speed and duplex setting (Full or Half).
TxPkts
This field displays the number of packets transmitted from the ZyWALL
on the interface since it was last connected.
on the interface since it was last connected.
Table 30 Monitor > System Status > Interface Status (continued)
LABEL
DESCRIPTION