ZyXEL Communications USG 2000 User Manual

 Chapter 20 HTTP Redirect

ZyWALL USG 2000 User’s Guide

• a application patrol rule to allow HTTP traffic between ge4 and ge2.
• a policy route to forward HTTP traffic from proxy server A to the Internet.

 for related information on these screens.

To configure redirection of a HTTP request to a proxy server, click Configuration 
> Network > HTTP Redirect. This screen displays the summary of the HTTP 
redirect rules.

Note: You can configure up to one HTTP redirect rule for each (incoming) interface.

Figure 297   Configuration > Network > HTTP Redirect   

The following table describes the labels in this screen.  

Table 99   Configuration > Network > HTTP Redirect

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click Edit to open a screen where 
you can modify the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms 
you want to remove it before doing so.

Activate

To turn on an entry, select it and click Activate.

Inactivate

To turn off an entry, select it and click Inactivate.

#

This field is a sequential value, and it is not associated with a specific 
entry.

Status

This icon is lit when the entry is active and dimmed when the entry is 
inactive.

Name

This is the descriptive name of a rule.

Interface

This is the interface on which the request must be received.

Proxy Server

This is the IP address of the proxy server.