ZyXEL Communications USG 2000 User Manual
Chapter 22 IP/MAC Binding
ZyWALL USG 2000 User’s Guide
413
screen. Use this screen to configure an interface’s IP to MAC address binding
settings.
settings.
Figure 307 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
22.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the
IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP
addresses to which the ZyWALL does not apply IP/MAC binding.
IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP
addresses to which the ZyWALL does not apply IP/MAC binding.
Figure 308 Configuration > Network > IP/MAC Binding > Exempt List
Table 104 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL
DESCRIPTION
Interface
Name
Name
This field displays the name of the interface within the ZyWALL and the
interface’s IP address and subnet mask.
interface’s IP address and subnet mask.
IP Address
Enter the IP address that the ZyWALL is to assign to a device with the
entry’s MAC address.
entry’s MAC address.
MAC Address
Enter the MAC address of the device to which the ZyWALL assigns the
entry’s IP address.
entry’s IP address.
Description
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer’s owner.
example, you may want to list the computer’s owner.
OK
Click OK to save your changes back to the ZyWALL.
Cancel
Click Cancel to exit this screen without saving.