ZyXEL Communications P-324 User Manual
14-4
UPnP
Table 14-1 Configuring UPnP
FIELD
DESCRIPTION
Allow UPnP to pass
through firewall
through firewall
Select this check box to create a static LAN to LAN/Prestige rule that allows
forwarding of ports 1900 and 80. Selecting this check box also creates a
dynamic firewall rule every time a NAT forwarding port is reserved for UPnP.
This setting remains active until you disable UPnP or clear this check box.
Clear this check box to have the firewall block all UPnP application packets
(for example, MSN packets) instead of creating a firewall rule for them.
forwarding of ports 1900 and 80. Selecting this check box also creates a
dynamic firewall rule every time a NAT forwarding port is reserved for UPnP.
This setting remains active until you disable UPnP or clear this check box.
Clear this check box to have the firewall block all UPnP application packets
(for example, MSN packets) instead of creating a firewall rule for them.
UPNP Name
This identifies the ZyXEL device in UPnP applications.
Apply
Click Apply to save the setting to the Prestige.
Reset
Click Reset to begin configuring this screen afresh.
14.3 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
9. Click
Start and Control Panel. Double-click Add/Remove
Programs.
10. Click on the Windows Setup tab and select Communication in
the Components selection box. Click Details.