ZyXEL Communications P-324 User Manual
Prestige 324 Intelligent Broadband Sharing Gateway
WAN Setup and Dial Backup
6-1
Chapter 6
WAN Setup and Dial Backup
This chapter describes how to configure the WAN using menu 2 and dial-backup using menus 2,
2.1 and 11.1.
6.1 Cloning
The
MAC
Address
The MAC address field allows users to configure the WAN port's MAC address by using either the factory
default or cloning the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the rom file (ZyNOS configuration file). It will not change unless you change the
setting in menu 2 or upload a different rom file.
default or cloning the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the rom file (ZyNOS configuration file). It will not change unless you change the
setting in menu 2 or upload a different rom file.
ZyXEL recommends that you clone the MAC address of a computer on your LAN
even if your ISP does not require MAC address authentication.
Figure 6-1 MAC Address Cloning in WAN Setup Menu
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 115200
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.