ZyXEL Communications P-324 User Manual
Prestige 324 Intelligent Broadband Sharing Gateway
8-6
Internet Access
Table 8-3 New Fields in Menu 4 (PPPoE) screen
FIELD DESCRIPTION
EXAMPLE
Encapsulation
Press the [SPACE BAR] and then press [ENTER] to choose
PPPoE. The encapsulation method influences your choices
for IP Address.
PPPoE. The encapsulation method influences your choices
for IP Address.
PPPoE
Idle Timeout
This value specifies the time in seconds that elapses before
the Prestige automatically disconnects from the PPPoE
server.
the Prestige automatically disconnects from the PPPoE
server.
300
(default)
8.2 Internet
Test
Setup
After configuring the menu 4 fields when you press [ENTER] to confirm you will see the message, " Do
you wish to perform the Internet Setup Test[y/n]:" if you have chosen PPTP or PPPoE as your
encapsulation method. Say 'Y' to test your setup. An example of Internet Setup Test is shown next.
you wish to perform the Internet Setup Test[y/n]:" if you have chosen PPTP or PPPoE as your
encapsulation method. Say 'Y' to test your setup. An example of Internet Setup Test is shown next.
Figure 8-4 Internet Setup Test Example
Start dialing for node <ChangeMe>...
### Hit any key to continue.###
$$$ DIALING dev=a ch=0..........
$$$ OUTGOING-CALL phone()
$$$ PPTP: Start tunnel setup, send SCCRQ
$$$ PPTP: Start tunnel setup, send SCCRQ
$$$ PPTP: OCRQ sent
$$$ CALL CONNECT speed<10000000> type<10> chan<0>
$$$ LCP opened
$$$ CHAP login to remote OK
$$$ IPCP negotiation started
$$$ CCP stopped
$$$ CCP stopped
$$$ BACP stopped
$$$ IPCP neg' Primary DNS 202.xxx.xxx.x
$$$ IPCP opened